Close-up of HT08K energy absorber shock-absorbing lanyard componentTwin lanyard double hook attachment points on safety harnessWorker wearing full body harness at construction site heightAdjustable webbing straps and buckles on full body harness
Full Body Harness Malaysia
Product Overview
The HORNET B01-00429 is a complete full body harness system combining a full body harness, energy absorber (HT08K), and twin lanyard with double hook (HT02) into a single fall-protection set. Distributed in Malaysia through Blue Box Asia at safety-bbasb.com, this Singapore-quality harness set is engineered for workers operating at height on construction sites, scaffolding, rooftops, and elevated industrial platforms across Malaysia.
This harness set is SIRIM Malaysia certified and manufactured to BS EN 361:2002, the British/European standard governing full body harnesses for fall arrest. The set also carries ISO and CE standard approval, giving Malaysian employers and safety officers confidence that the equipment meets internationally recognised fall-protection benchmarks. The twin lanyard double hook configuration allows workers to maintain continuous 100% tie-off while transitioning between anchor points at height, a key requirement for safe work-at-height practice.
In Malaysia, DOSH (Department of Occupational Safety and Health) enforces strict requirements for work-at-height activities under the Occupational Safety and Health (Safety and Health Officer) regulations and related guidelines, mandating the use of certified fall-arrest equipment such as full body harnesses for any work conducted above specified heights. The World Health Organization has separately noted that falls remain among the leading causes of occupational injury and fatality worldwide, underscoring why certified, well-maintained fall-arrest equipment is a non-negotiable component of any work-at-height programme.
The energy absorber (HT08K) component is a critical safety feature: in the event of a fall, it deploys to progressively dissipate the arrest force, significantly reducing the peak impact load transmitted to the wearer’s body compared to a harness and lanyard without shock absorption.
Product Specifications
PRODUCT SPECIFICATIONS
Brand
HORNET
Model Number
B01-00429
Product Type
Full Body Harness + Energy Absorber + Twin Lanyard Set
Component Codes
HT08K (Energy Absorber), HT02 (Twin Lanyard)
Certification
SIRIM Malaysia Certified
Standard Compliance
BS EN 361:2002
Additional Approvals
ISO Standard, CE Standard
Lanyard Configuration
Twin Lanyard with Double Hook (100% tie-off capable)
Approximate Weight
2-2.5 kg / Set
Quality Origin
Singapore Quality
Application
Construction, scaffolding, rooftop, and elevated industrial platform work
Adjustability
Adjustable webbing straps with quick-release buckles (shoulder, chest, waist, leg)
Standards Compliance
Suitable for DOSH Malaysia work-at-height requirements
PRO Usage & Maintenance Tips
PRO USAGE & MAINTENANCE TIPS
Inspect the harness webbing, stitching, D-rings, and buckles before every use — look for fraying, cuts, chemical damage, or deformation, and remove from service immediately if any defect is found.
After any fall-arrest event, the energy absorber (HT08K) must be taken out of service and inspected by a competent person, even if no visible damage is apparent — the internal tearing mechanism may already be partially deployed.
Always connect at least one hook of the twin lanyard to an approved anchor point before disconnecting the other, maintaining 100% continuous tie-off while moving between work positions at height.
Ensure the harness is correctly fitted and adjusted — too loose increases fall distance and injury risk, while too tight restricts circulation and mobility during extended wear.
Store the harness and lanyard away from direct sunlight, chemicals, and sharp edges when not in use, as UV exposure and chemical contact can degrade webbing strength over time.
Schedule formal inspection by a competent person at intervals set by your organisation’s safety procedures, and keep inspection records as required under DOSH Malaysia work-at-height guidelines.
Train all users on correct donning, adjustment, and anchor point selection before first use — a certified harness only performs to standard when used correctly by a properly trained worker.
Applications
Category 1 — Construction & Building Sites
Scaffolding erection, inspection, and dismantling work
Building facade and rooftop maintenance access
Formwork and structural steel erection at height
General construction work-at-height compliance
Category 2 — Industrial & Utility Work
Tower, mast, and pylon climbing and maintenance
Warehouse high-rack access and mezzanine work
Plant and equipment maintenance at elevated positions
Confined space entry with fall-arrest requirements
Category 3 — Facilities & Specialist Access
Window cleaning and building maintenance at height
Solar panel installation and rooftop electrical work
Telecommunications tower and antenna servicing
Signage installation and elevated advertising structure work
Features & Benefits
FEATURE
BENEFIT
SIRIM Malaysia Certification
Provides assurance of compliance with recognised Malaysian safety certification standards
BS EN 361:2002 Compliance
Meets the established British/European standard specifically governing full body harnesses for fall arrest
ISO & CE Standard Approval
Adds internationally recognised quality and safety benchmarks beyond local certification alone
Energy Absorber (HT08K)
Progressively dissipates fall-arrest forces, significantly reducing peak impact load on the wearer’s body
Twin Lanyard Double Hook (HT02)
Enables continuous 100% tie-off as workers move between anchor points, closing a common fall-protection gap
Adjustable Webbing & Buckles
Quick-release buckles at shoulder, chest, waist, and leg points allow a secure, personalised fit
Singapore Quality Manufacturing
Reflects a manufacturing standard associated with strong regional quality control and consistency
Complete Set Configuration
Harness, energy absorber, and twin lanyard sold together, removing compatibility guesswork for buyers
Frequently Asked Questions (FAQ)
Q1: What is included in the HORNET B01-00429 set?
A: The set includes a full body harness, an HT08K energy absorber, and an HT02 twin lanyard with double hook — a complete fall-arrest system sold together as one configuration.
Q2: Is this harness certified for use in Malaysia?
A: Yes. The harness is SIRIM Malaysia certified and manufactured to BS EN 361:2002, with additional ISO and CE standard approvals, meeting both local and internationally recognised fall-protection benchmarks.
Q3: What does the energy absorber (HT08K) do?
A: The energy absorber deploys during a fall to progressively dissipate arrest forces, significantly reducing the peak impact load transmitted to the wearer’s body compared to a lanyard without shock absorption.
Q4: Why does the lanyard have two hooks (twin lanyard)?
A: The twin lanyard double hook configuration allows a worker to connect one hook to a new anchor point before disconnecting the other, maintaining continuous 100% tie-off while moving between work positions at height.
Q5: How much does the full set weigh?
A: The complete set — harness, energy absorber, and twin lanyard — weighs approximately 2-2.5kg.
Q6: What should I do after this harness has been used to arrest a fall?
A: The energy absorber and any component involved in a fall-arrest event must be immediately taken out of service and inspected by a competent person, even if no visible damage is apparent.
Q7: How often should the harness be inspected?
A: Inspect the harness before every use for visible defects, and schedule formal inspection by a competent person at intervals set by your organisation’s safety procedures, in line with DOSH Malaysia guidelines.
Q8: Does DOSH Malaysia require certified harnesses for work at height?
A: Yes. DOSH Malaysia enforces requirements for work-at-height activities, mandating certified fall-arrest equipment such as full body harnesses for work conducted above specified heights.
Customer Pain Points & HORNET Solutions
CUSTOMER PAIN POINT
HORNET SOLUTION
Uncertainty over whether equipment meets DOSH/legal requirements
SIRIM Malaysia certification plus BS EN 361:2002, ISO, and CE approval give employers documented assurance the harness meets recognised safety standards.
High fall-arrest impact forces risking injury even when a fall is caught
The HT08K energy absorber progressively dissipates arrest forces, substantially reducing peak impact load on the wearer’s body during a fall.
Workers disconnecting fully while moving between anchor points
The HT02 twin lanyard double hook design allows one hook to be connected before the other disconnects, maintaining continuous 100% tie-off.
Sourcing harness, absorber, and lanyard separately and matching compatibility
This set bundles a compatible harness, energy absorber, and twin lanyard together, removing guesswork around component compatibility.
Adjustable webbing straps with quick-release buckles at shoulder, chest, waist, and leg points allow a secure, personalised fit that encourages consistent correct use.
Technical Documentation & Order CTA
Included Components
1x HORNET full body harness (adjustable webbing, quick-release buckles)
1x HT08K energy absorber
1x HT02 twin lanyard with double hook
Certification documentation: SIRIM, BS EN 361:2002, ISO, CE
Not Included
Anchor point hardware (roof anchors, beam clamps, etc. — available separately)
Helmet and other complementary PPE
Packaging & Logistics
Packed in a protective carton box, folded to prevent webbing creasing
Standard carton quantity: 10 sets per master carton
Lead time: 5-10 working days (standard order); 15-20 days (bulk workforce order)
READY TO ORDER?
Contact our team for bulk pricing, workforce fit-outs, and certification documentation.
Visit: https://www.safety-bbasb.com
Email: sales@safety-bbasb.com | WhatsApp or Call for fastest response
PACKAGING BOX ESTIMATE (For Courier Booking)
Estimated Packed Box Size: 40cm (L) x 30cm (W) x 15cm (H)
Note: Harness folded flat to prevent webbing creasing; figures are estimates for courier/shipping booking purposes and should be confirmed against the actual packed carton before dispatch.
Why Choose HORNET via Blue Box Asia?
HORNET fall protection equipment is distributed in Malaysia by Blue Box Asia Sdn Bhd (BBA) through safety-bbasb.com. Our products are sourced with documented certification and undergo quality checks before dispatch. We offer:
Genuine SIRIM, BS EN 361:2002, ISO, and CE certified equipment with documentation on request
Competitive ex-stock and bulk workforce pricing across Malaysia
Technical support and guidance on work-at-height compliance requirements
Nationwide delivery across Peninsular Malaysia and East Malaysia
Full product range: fall protection PPE, workplace safety systems, bollards, traffic and visual safety
Disclaimer
Product specifications, certifications, and availability are subject to change without notice. All images are for illustration purposes only. Actual product may differ slightly from images shown. This harness set must be used strictly in accordance with the manufacturer’s instructions, applicable DOSH Malaysia work-at-height regulations, and by personnel trained in its correct use. Blue Box Asia Sdn Bhd and HORNET make no warranty, express or implied, regarding suitability for any specific application beyond the stated certification scope. Buyers should request full certification documentation and verify current compliance requirements with DOSH Malaysia (dosh.gov.my) prior to procurement. Pricing is subject to confirmation at point of order.
